A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-2234003.png)
-
Remove hand vacuum pump from intake manifold runner control vacuum actuator.
-
Connect electrical harness connectors - 1 - and - 2 -.
-
Hand-tighten union nuts of high-pressure lines - 1 -, - 4 - and - 7 -.
-
Make sure high-pressure lines are seated free of stress.
-
To tighten SW 14 high pressure line at fuel rail, use torque wrench (V.A.G 1331) with socket insert AF 14, open ring (V.A.G 1331/8).
-
To fasten high-pressure line (17 mm) to fuel rail, use torque wrench (V.A.G 1331) with Socket Insert AF 17 (V.A.G 1331/2).
