A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-2277005.png)
-
Remove bolts - 1 through 9 - and then remove the lower cover for the timing chain from the bond.
All:
-
Press rear crankshaft seal out of lower timing chain cover.
Installing
‹› Replace gaskets, seals and O-rings.
‹› During installation, all cable ties must be re-installed at the same location.
-
Pull alignment bushing out of top right of cylinder block.
-
Chamfer the alignment bushing with a file, as shown in the illustration.
