A6 Quattro Wagon V6-3.2L (BKH) (2006)
‹› With the cylinder head installed only half of the holes in the cylinder head gasket are visible.
CAUTION!
Cylinder head gasket must not be kinked. A kinked cylinder head gasket must be replaced.
-
Bend the ends of the cylinder head gaskets very slightly downward - arrows - until the upper sealing surface of the gasket and cylinder head can
be cleaned.
-
Clean both cylinder head gaskets, top and bottom, so they are completely free of any oil or grease.
‹› Note the expiration date of the sealing compound.
-
Cut tube nozzle at front marking (jet dia. approximately 2 mm).