A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-5828004.png)
-
Following attachment, check routing of refrigerant pipes. They must be inserted in holders provided and not make contact with other components.
-
Reinstall removed components (air ducts, water and oil coolers, etc.) in reverse order of removal.
-
Install the front bumper (and all other components that were removed) Removal and Installation.
-
Evacuate and refrigerant circuit after assembly and refill.
-
Fill coolant and bleed coolant circuit (e.g. for Audi RS6).
-
Check the DTC memory for the Climatronic Control Module (J255) A/C control head and erase any faults displayed if necessary.
-
Operate the A/C system after filling the refrigerant circuit => [ A/C System, Operating after Filling Refrigerant Circuit ] See: Description and
Operation/A/C System, Operating after Filling Refrigerant Circuit
