audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

A/C Pressure/Temperature Sensor|Page 16391 > < A/C Pressure/Temperature Sensor|Page 16389
Page 1
background image

Discharge Air Temperature Sensor / Switch: Service and Repair
Right Vent Temperature Sensor

Right Vent Temperature Sensor

Removing

-

Switch off ignition.

-

Remove glove box.

-

Remove right lower center console cover.

-

On the right side remove the holder for the instrument panel -  A - and the screws - C -.

-

Remove the air duct to the front passenger's footwell vent -  B -.

-

Mark connector - A - to the Right Vent Temperature Sensor (G151) (danger of interchange with other connectors of same construction).

-

Disconnect connector - A - from the Right Vent Temperature Sensor (G151).

-

Rotate the Right Vent Temperature Sensor (G151) - B - approximately 90° in direction of arrow. 

-

Remove the Right Vent Temperature Sensor (G151) - B - from the A/C unit.

Installing

Installation is carried out in the reverse order, when doing this note the following.

A/C Pressure/Temperature Sensor|Page 16391 > < A/C Pressure/Temperature Sensor|Page 16389