A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-8193002.png)
Service
1. Remove D-pillar trim, tail gate trim and rear headliner trim.
2. Replace a section of the original water hose by cutting approximately 5 cm beyond the last mounting point of the hose.
3. Remove the cloth insulation tape from both ends of the water hose and install connector piece 1J0 955 875.
4. Cut the replacement hose, part number N 018 046 3, to the same length as the removed section of water line minus 2 cm and install connector
piece 1J0 955 875 R.
