A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove clips - 2 - from mirror base - 1 -.
-
Remove the rain/light recognition sensor (G397) - 3 - from the mirror base.
-
A sensor foil remains affixed to the windshield.
-
If the same windshield is being re-installed, remove the sensor foil from the glass including any remaining adhesive.
-
Clean the surface with cleaning solution D 009 401 04.
Install the rain/light recognition sensor (G397)
CAUTION!
If the same rain/light recognition sensor (G397) is being re-installed, then the sensor foil must be replaced.
-
If necessary, also remove the sensor foil from the rain/light recognition foil (G397).
-
Carefully pull the sensor foil - 2 - from the rain/light recognition sensor (G397)- 1 -.
-
Clean the surface with cleaning solution D 009 401 04.
CAUTION!
Sensor surface must be completely free of foil remnants.
-
Peel silicon paper - 3 - from sensor foil - 2 -.
-
The transparent protective film - 1 - remains on the sensor foil as an assembly aid.