A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-8868002.png)
Installing
‹› Tightening specification. Refer to=> [ Outer Rear Lid Lamps Assembly Overview, Avant, through May 2008 ] See: Service and Repair/Outer Rear
Lid Lamps Assembly Overview, Avant, Through May 2008.
Install in reverse order of removal, observing the following:
‹› Replace adjusting nut with damaged seal.
-
Attach tail lamp at body and press retaining bolts into clip nuts.
-
Tighten cap nut.
