A6 Quattro Wagon V6-3.2L (BKH) (2006)
Combination Switch: Service and Repair
Turn Signal Switch
Turn Signal Switch
Removing
-
Remove Steering Column Switch Module (SCSM). Refer to => [ Steering Column Switch Module ].
‹› Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.
-
Carefully release catches - arrows -.
-
Pull return spring with slip ring - 2 - with Steering Angle Sensor (G85) - item 1 - off from steering column switch module (SCSM).
-
Remove screws - arrows -.
-
Pull Steering Column Electronic Systems Control Module (J527) - item 2 - and Windshield Wiper/Washer Switch (E22) - item 3 - off from
steering column switch module (SCSM).