A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-8903001.png)
Turn Signal Bulb: Service and Repair
Turn Signal Indicator Bulb, Replacing
Turn Signal Indicator Bulb, Replacing
Removing
-
Pry off cap - 1 - in front wheel house liner in - direction of arrow -.
NOTE: On vehicles without cap, the wheel house liner must be loosened in front area.
-
Turn bulb socket counter-clockwise - arrow - and remove from housing.
-
Release securing clip in - direction of arrow - and pull light bulb - 1 - out of socket - 2 -.
Installing
CAUTION:
-
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
Installation is performed in reverse order of removal, noting the following:
-
Insert new bulb into housing, do not touch glass cone with bare hands.
-
Push cap into wheel house liner until it engages noticeably.
