A6 Quattro Wagon V6-3.2L (BKH) (2006)
Alignment: Procedures
Lifting Vehicle With Suspension 1BA, 1BE, 1BR, 1BV, 1BK, 1BB
Lifting vehicle with suspension 1BA, 1BE, 1BR, 1BV, 1BK, 1BB
During the next step make sure that the wheels do not lose contact with the turntables when the vehicle is raised!
If this should happen anyway, the turntables may not be moved. Otherwise measurement result will be falsified!
-
Apply axle lift to the front jacking points and raise vehicle.
Note:
^
Raise vehicle by 60 mm.
-
Push cylinder out of threaded spindles and fix with locking pins.
Make sure that the safety bolts - arrows - are correctly positioned!
-
Lower vehicle on spacer V.A.G. 1925 -.