A6 Quattro Wagon V6-3.2L (BKH) (2006)
^
Dimension - a - for allroad vehicles with air spring 380 mm
CAUTION!
^
Do not lift or lower vehicle when the engine/transmission jack stands below the vehicle.
^
Do not leave engine/transmission jack beneath the vehicle any longer than necessary.
Work operations after setting control position
-
Tighten respective bolts/nuts.
-
Lower wheel bearing housing.
-
Remove engine/transmission jack from below vehicle.
-
Remove wheel hub support T10149.
-
Install air line - 1 - onto connection - 2 -.
-
Install bolt - 1 -.
Charging air spring of rear axle
CAUTION!
When charging, make sure that centering pin - arrow a - drives into bore of longitudinal member - arrow b -.