A6 Quattro Wagon V6-3.2L (BKH) (2006)
Power Steering Fluid: Service and Repair
Power steering fluid level, checking
-
With engine not running, move front wheels in straight-ahead position.
Fluid, when cold (ca. 20°C):
-
Remove screw cap.
-
Clean off oil dipstick with a clean rag. Install cap on hand-tight and remove again.
Note:
^
Install cap fully in to get an accurate fluid level reading.
-
Check oil level: Oil level must be located in area - A -
Fluid at operating state temperature (approx. 80°C):
-
Remove screw cap.
-
Clean off oil dipstick with a clean rag.
-
Install cap on hand-tight and remove again.
Note:
^
Install cap fully in to get an accurate fluid level reading.
-
Check oil level: Oil level must be within area - B -.
Note:
^
If fluid level is above the mark, some fluid must be siphoned off