A6 Quattro Wagon V6-3.2L (BKH) (2006)
Filling rear axle air spring
CAUTION!
When charging, make sure that centering pin - arrow a - drives into bore of longitudinal member - arrow b -.
-
Fill the system using the Diagnostic Operation System (VAS 5051 A). Refer to => [ System, Venting or Filling ] See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and Inspection/Component Tests and General Diagnostics/System,
Venting or Filling.
-
Install wheel.
-
Place vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Steering and Suspension/Suspension/Service and
Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Tighten wheel.