A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Using a screwdriver, bend retaining tabs - 1 - of radial adjustment aside - arrow - and pull support ring - 2 - from fuel injector.
-
Attach slide wrench (T10133/3) with adapter (T10133/2).
-
Guide puller (T10133/2) into groove on fuel injector and carefully drive fuel injector out.
‹› When setting the puller in place, the radial adjustment can be destroyed, because the retaining tabs break.
-
Carefully remove old combustion chamber seal - arrow -, thereby cutting seal open with a knife or spreading seal open with a small screwdriver
and pulling it forward and off.