A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Make sure that the groove of fuel injector does not become damaged. If groove is damage, fuel injector must be replaced.
Installing
‹› Replace combustion chamber seal and O-ring.
‹› Replace spacer ring if damaged.
‹› Lightly moisten fuel injector O-rings with clean engine oil.
‹› Re-insert injector lines at same cylinder.
-
Clean bore in cylinder head with nylon cylinder brush (T10133/4).
-
Clip radial adjustment - 1 - to support ring - 2 -.
-
When reinstalling a fuel injector, use a clean cloth to clean combustion residue from groove for combustion chamber seal and shaft of fuel injector.
-
Place assembly cone (T10133/5) with new combustion chamber seal - 1 - on fuel injector - 2 -.