A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Using a Multimeter , check the Intake Manifold Runner Control (IMRC) Valve (N316) for resistance
Specified value: 450 to 1000 ohms.
If specified value is not obtained:
-
Replace the Intake Manifold Runner Control (IMRC) Valve (N316)
If specified value is obtained:
Checking voltage
-
Using a Multimeter , Check the wiring connection from the electrical harness connector terminal to the Engine Control Module (ECM) Power
Supply Relay (J363) terminal through the fuse for an open circuit.
-
Operate the starter briefly.
Specified value: Battery voltage.
-
Switch the ignition off.