A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
If, during the "Update - Programming", a fault message is displayed:
-
Confirm that VAS 5051 or VAS 5052 diagnostic tool power supply is adequate and that ALL appliances with high electromagnetic radiation (i.e.
mobile phones) are switched OFF.
-
The "Update - Programming" process must then be started from the beginning using the "Repeat" button (arrow). DO NOT use the "Cancel" button.
Once "Update - Programming" is complete, the control module must be re-initialized.
-
The tester requests you to switch the ignition OFF.
-
Switch ignition OFF
-
Wait 20 seconds and switch ignition ON.