A6 Quattro Wagon V6-3.2L (BKH) (2006)
If ECM software level (arrow) is 0050 or higher:
-
Contact the Audi Helpline for further instructions, "Update - Programming" is not required.
If ECM software level (arrow) is lower than 0050:
-
Proceed to "PRIOR to performing "Update - Programming".
Tip:
^
When performing the Update - Programming procedure, ALL DTCs for all Systems are erased.
^
DTCs linked to Guided Fault Finding function tests will be lost. Therefore, always address stored DTCs for Customer concerns unrelated to the
Update - Programming procedure first.
PRIOR to performing "Update - Programming":
-
Select "Vehicle Self Diagnosis" mode.
-
Select Diagnosis function "00 - Collection services".
-
Select "Check DTC memory - complete system". which will interrogate all fault memories.
^
When DTC interrogation is complete "Function Complete" will be displayed.
-
Select back arrow < on navigation bar to return to vehicle systems screen.
-
Select vehicle system "01 - Engine electronics".
"Update - Programming" procedure, performing
-
Select "Update - Programming" option at bottom of screen (arrow).