A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
After installing passenger seat, select "Airbag" function in "Guided Fault Finding".
When installing a new service kit and after every repair on the front passenger seat:
-
Seat Occupied Recognition Control Module J706 , basic setting
2
-
Bolts
-
2.5 Nm
3
-
Connector on Seat Occupied Recognition Control Module J706
-
Must not be separated under any circumstances.
4
-
Seat Occupied Recognition Pressure Sensor G452
5
-
Pressure hose
CAUTION: The pressure hose - 5 - and the Seat Occupied Recognition Mat must not be kinked under any circumstances during
repairs.
-
Secure pressure hose at guide clip - 8 - at specified marking.
6
-
Harness connector between service kit and seat wiring harness
7
-
Connector on Seat Occupied Recognition Pressure Sensor G452
-
Must not be separated under any circumstances.
8
-
Guide clip
9
-
Retaining bracket