A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Guide Seat Occupied Recognition Pressure Sensor (G452) and Seat Occupied Recognition Control Module (J706) from above through seat pan
without disconnecting connectors.
-
Pull the crease between seat pan and Seat Occupied Recognition Mat - 1 - so that it is smooth (free of folds).
-
Secure the Seat Occupied Recognition Mat - 1 - with the clips - 2 - and - 3 - (Qty. 2).
1
Seat Occupied Recognition Control Module (J706)
Installing
-
Secure Seat Occupied Recognition Pressure Sensor (G452) - 4 - on bracket - 9 -.
-
Secure Seat Occupied Recognition Control Module (J706) with bolts - 2 - (Qty. 2) to 2.5 Nm.
-
Connect connector - 6 -.
-
Upholster the seat pan, thereby all upholstery clips must be attached and be installed at the original position:
‹› Standard seat: Standard seat => [ Seat Pan Cover and Upholstery, Standard Seat ] See: Body and Frame/Seats/Service and Repair/Overhaul/Seat
Upholstery, Covers/Front Seat Pan Covers and Upholstery, Sports seat => [ Seat Pan Cover and Upholstery, Sport Seat ] See: Body and
Frame/Seats/Service and Repair/Overhaul/Seat Upholstery, Covers/Front Seat Pan Covers and Upholstery.
‹› Electric seat: Standard seat => [ Seat Pan Cover and Upholstery, Standard Seat ] See: Body and Frame/Seats/Service and Repair/Overhaul/Seat
Upholstery, Covers/Front Seat Covers and Upholstery, Power Memory Seats, Sports seat => [ Seat Pan Cover and Upholstery, Sport Seat ] See:
Body and Frame/Seats/Service and Repair/Overhaul/Seat Upholstery, Covers/Front Seat Covers and Upholstery, Power Memory Seats.
Further installation is performed in the reverse order of removal.