A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove the brake pressure sensor from the distributor.
‹› The brake line - 2 - must be loosened in order to remove the brake pipe distributor.
Installing
-
Installation is performed in the reverse order of removal.
-
Tightening specification: 28 Nm
The brake line - 2 - must be loosened in order to remove the brake pipe distributor.
-
Attach the brake line - 2 - after installing the brake pipe distributor. Tightening specification: 12 Nm.
-
Bleed brake system. Refer to => [ Bleeding Brake System ] See: Brakes and Traction Control/Hydraulic System/Service and Repair.