A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove Steering Column Electronic Systems Control Module (J527) - item 1 - from steering column switch module.
Installing
‹› Tightening specification. Refer to=> [ Steering Column Switch Module Assembly Overview ] See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Column Control Module/Service and Repair/Steering Column Switch Module
Assembly Overview.
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
-
Install Steering Column Switch Module (SCSM). Refer to => [ Steering Column Switch Module ].
If Steering Column Electronic Systems Control Module (J527) was replaced, it must be coded Vehicle diagnosis, testing and information system VAS
5051.
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).