A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Check the wiring for a short circuit to Battery positive (+) or an open circuit.
-
If necessary, repair the wiring connection.
If no malfunctions are found in wiring:
-
Replace the SIMOS Control Module J361.
Assembly is performed in the reverse order of removal.
-
Install the intake manifold upper-part
Final procedures
After repair work, the following work steps must be performed in the mentioned sequence:
1. Check the DTC memory.
2. If necessary, erase the DTC memory.
3. If the DTC memory was erased, generate readiness code.
-
End diagnosis and switch the ignition off.