A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Spray entire surface of sensor foil - 1 - with cleaning solution D 009 401 04 and insert sensor in mirror base.
NOTE: Part numbers are for reference only. Always check with your Parts Department for the latest part number information
CAUTION: Rain sensor must be free of inclusions and bubbles on the windshield to function properly.
-
Press sensor retaining clamps on mirror base.
Replacing Rain Sensor
NOTE: To remove sensor, proceed as described above.
-
If necessary, completely remove foil remnants from windshield.
-
Clean sensor contact surface on windshield with cleaning solution D 009 401 04.
-
Lightly press tabs - arrow - on protective cap - 1 - together and remove from rain sensor - 2 -.
-
Spray entire surface of sensor foil - 1 - with cleaning solution D 009 401 04 and insert sensor in mirror base.
-
Press sensor onto windshield without bubbles and place retaining clamps on mirror base.
NOTE: Part numbers are for reference only. Always check with your Parts Department for the latest part number information
CAUTION: Rain sensor must be free of inclusions and bubbles on the windshield to function properly.