A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
In area - A - of item - 2 -, turn rotary knob so it aligns with marking on mirror (the number 2 on rotary knob must point toward vehicle).
-
Now align VAS 6190 by sliding sideways - arrows B - so that laser beam strikes the center of the sensor lens on the horizontal.
-
Use adjusting screws - 1 - to bring spirit levels - 2 - on VAS 6190 into horizontal position.
-
Adjust vertical slits - 4 - on VAS 6190 so that laser beam strikes center of sensor lens in the vertical.
-
Set same individual toe values of front axle using fine-adjustment screw - 3 -.
-
The difference of both individual toe values must be less than 6' or equal.