A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Bring bubble levels - 2 - on (VAS 6190) into balance using adjustment screws - 1 -.
-
Adjust vertical slits - 4 - on (VAS 6190) so that laser beam is vertically centered on sensor lens.
-
Adjust the same front axle individual toe settings using fine adjustment screw - 3 -.
-
The difference between individual toe values must be less than 6' or they must be the same.
-
Bring bubbles - 2 - on measurement sensor - 1 - into balance.