A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Apply continuous marking - arrow A - at groove - arrow B -.
Note:
^
Marking is needed to align bearing with subframe
^
When pulling in bearing, groove is masked by tool.
-
Observe different bearing versions.
Bearing - 2 - with yellow dot - arrow B - must be installed on right side.
-
Position bearing - 2 - with groove - 1 - at your marking - arrow A -.
-
Attach tools and bearing at subframe, as shown in illustration. Marking - arrow A - on bearing and marking - arrow B - on subframe must align.
1. Spindle 3346/2
2. Thrust piece T40144
3. Mount
4. Washer T40032/2
-
Pull bearing into subframe until stop.
Note:
^
If paint damage has occurred during bearing replacement, repair using corrosion protection, primer and black top coat.