A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-5372003.png)
-
Check rim offset of bearing - 1 - in control arm - 2 -.
Dimensions - a - and b - must be identical.
-
If dimensions - a - and - b - are different, press bearing further - 1 -.
-
Install control arm.
Bearing for control arm (on subframe side), pressing out and pressing in
Special tools, testers and auxiliary items required
^
Thrust plate VW 402
^
Punch VW 412
^
Tube 3296
^
Assembly tool T40032
^
Assembly paste G 052 109 A2
Note:
^
Hold control arm firmly in position while pressing bearing out and in.
Pressing out bearing
-
Remove control arm.
