A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-5381003.png)
‹› When installing, make sure the bearing does not tilt.
-
Press bearing - 1 - into guide control arm - 2 -.
-
Note the installation depth marking when installing - arrow -.
-
Check installation position of bearing - 1 - in guide control arm - 2 -.
-
Check rim offset of bearing - 1 - in guide control arm - 2 -.
Dimensions - a - and - b - must be identical.
-
If dimensions - a - and - b - are different, press the bearing - 1 - in more.
-
Install guide control arm. Refer to => [ Guide Link ] See: Guide Link.
