A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-5433002.png)
-
Remove bolt - 1 -.
-
Remove bolts - 2 - with angled wrench. Do not bend upper retaining plate when doing so.
-
Remove level control system sensor.
-
Adapt replacement part accordingly and install.
-
Install bolts - 2 - using an angled wrench. Do not bend upper retaining plate when doing so.
‹› Hold Level Control System Sensor securely when tightening bolts - 2 -.
Sensor lever must point outward.
-
Install bolt - 1 -.
