A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
On vehicles with air suspension, position vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Service and
Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Tighten wheels. Refer to => Wheel and Tire Guide 44 Specifications.
-
Adapt control position again on vehicles with air spring suspension => [ Control Position, Programming ] See: Suspension Control ( Automatic -
Electronic )/Testing and Inspection/Programming and Relearning/Control Position, Programming.
-
On vehicles with automatic headlamp range control system, perform basic setting of headlamps.
-
Perform vehicle alignment. Refer to => [ Vehicle Alignment Procedure Overview ] See: Alignment/Service and Repair/Procedures/Vehicle
Alignment Procedure Overview.
Suspension setting at front/rear axle must be performed on a VW/Audi approved alignment rack.