A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Press front bearing (bonded rubber bushing) into subframe until stop.
Pressing out rear bearing
-
Install tools at rear bearing as shown in illustration.
1. Punch (VW 412)
2. Press piece (3416/1)
3. Subframe
4. Sleeve (T10301/3)
5. Thrust plate (VW 402)
6. Thrust plate (VW 401)
Pressing in rear bearing
-
Note installation position of bearing.
Catch - 1 - of rear bearing must align with recess - 2 -.