A6 Quattro Wagon V6-3.2L (BKH) (2006)
This clip does not need to be inserted again.
-
Remove the nut - 1 -, bolt - 2 - and both control arms - 3 - upward.
-
Do not widen the slits in the wheel bearing housing using a chisel or similar tool.
-
Remove the coupling rod of level control system sensor - 6 - from track control arm.
-
Remove hex bolt - 1 - and guide suspension strut fork out of track control arm.
-
Carefully unclip and disconnect harness connector - 2 -.