A6 Quattro Wagon V6-3.2L (BKH) (2006)
Level Control Solenoid Valve: Service and Repair
Level Control System Solenoid
Level Control System Solenoid
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
‹› Insert tool 10 (V.A.G 1783/1)
Removing
‹› The Level Control System Solenoid (N111) is installed on the air supply unit under the right front wheel housing liner.
-
Place vehicle on a hoist. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Service and Repair/Procedures/Positioning Vehicle on
Hoist and Wheels.
-
Remove noise insulation..
-
Slowly loosen the air line - 1 - from the air supply unit and let the air pressure escape. After the air pressure has escaped, remove the air lines.
‹› The illustration shows the air supply unit removed.
-
Disconnect electrical connector on the Level Control System Solenoid and remove the threaded connections - 1 -.