A6 Quattro Wagon V6-3.2L (BKH) (2006)
Dust Shield: Service and Repair
Boot, replacing
Special tools, testers and auxiliary items required
^
Hose clamp pliers VAG 1275
Removing
Note:
^
Replacement of boot is performed with suspension strut installed.
-
Position vehicle on lifting platform.
-
Remove wheel.
-
Carefully unclip and disconnect harness connector -2 -. Unhook wiring harness of harness connector - 2 - at suspension strut.
-
Remove coupling rod of level control system sensor - 6 - from control arm.
-
Remove hex bolt - 1 - and guide suspension strut fork out of control arm.