A6 Quattro Wagon V6-3.2L (BKH) (2006)
Pressing bearing inner race off of wheel hub
-
Insert separator between bearing inner race - 1 - and spinning washer - 2 - and pre-load spindle.
Note:
^
Use a commercially available separator, e.g. Kukko 1712.
This deforms the spinning washer and then must be replaced.
-
Press bearing inner race off wheel bearing of wheel hub.
Replacing spinning washer of wheel bearing
-
Carefully pry off old spinning washer - 1 - using a screwdriver.
-
Position new spinning washer on wheel hub.