A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Drive new oil seal as far as stop using thrust piece T10139
-
Insert shim - 2 - and tapered roller bearing outer race - 1 - for differential onto stop in transmission housing by hand.
Note:
^
Make sure that shim and outer race are kept straight when inserting.
-
Renew O-ring - arrow -.
-
Install differential in transmission housing.
Note this if the outer race for tapered roller bearing and the shim have dropped out of final drive cover:
-
Lubricate shim and outer race for tapered roller bearing with gear oil and insert in final drive cover as far as stop.
-
Tighten bolts of cover for final drive as follows.