A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-3851008.png)
This illustration only applies to conical driveshafts - arrow -.
The chamfer on star faces toward driveshaft, this is used as an assembly aid.
-
Use special tool shown in illustration.
Special tool (T10065/2) must not come in contact with roller body.
-
Place triple roller star on shaft according to marking and drive on until impact.
-
Circlip must engage audibly, triple roller star must lie against circlip with no gap.
This illustration is only for cylindrical driveshafts - arrow -!
