A6 Quattro Wagon V6-3.2L (BKH) (2006)
Chamfer on inner diameter of ball hub (splines) must face contact shoulder of drive axle.
Use special tool shown in illustration.
The press block (40-204 A) and the clamping surface on the drive axle must be free of oil.
Circlip must be replaced.
-
Install circlip.
-
Check circlip for correct seating.
-
Insert 60 grams of joint grease in the boot side of the joint before installing the protective boot.
-
Install the protective boot onto the inner joint.
-
Apply 60 grams of joint grease to CV joint through ball paths.
-
Lubricate cover contact surface.
-
Align new cover with bolts - arrows - to bolt holes.