A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Make sure the seals - 6 - and - 2 - fit correctly before installing the window frame - 1 - in the door - 5 -
-
Replace seal if necessary
-
Remove protective paper from seals and press firmly onto window frame as shown.
-
Place window frame in door and install fitting screws- 4 - and collar screws- 3 -.
Window Regulator Motor, Removing and Installing
-
To remove, unscrew bolts - 2 - and remove window regulator motor.
-
Install window regulator motor. Refer to => [ Motor for Window Regulator ].
Upper door hinge