A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Remove bolts (Figure 12, -1-).
-
Pull trim sides (Figure 12, -2-) away from rear lid.
-
Then pull upper trim away from rear lid (Figure 12, -arrows B-).
-
Remove trim cover over left rear lid hinge.
Repairing hose for rear window washer
The hose for the rear window washer has to be cut at the points marked -A- and repaired with the repair hose provided.
-
Cut through the hose at the points marked (Figure 13, -A-).
-
Points marked -B- (Figure 13, -B-) show locations of clips that should be removed and reused with section of hose cut out.
Cutting of rear window washer hose