A6 Quattro Wagon V6-3.2L (BKH) (2006)
-
Reinstall D-pillar trim.
-
Reinstall luggage compartment trim and luggage compartment trim cover (left side)
-
Connect luggage compartment light connector and reinstall luggage compartment light.
Installing lower rear lid trim
Installation is reverse of removal, but note the following:
Note:
Replace damaged spring clamps if necessary.
-
Let lower rear lid trim engage in lid lock trim.
Tighten bolts (Figure 33, -3- and -4-).
Tightening torque - 4 NM