A6 Sedan V6-2.8L (AHA) (1998)
Trunk / Liftgate Latch: Service and Repair
Rear Lid And Rear Lid Lock
Rear Lid
Rear lid and rear lid lock, removing, installing and adjusting
1
-
Rear lid
Removing:
-
Remove warning triangle and holder - 5 -.
-
Remove rear lid lining.
-
Disconnect and unclip harness connectors.
-
A second person is required to lift off rear lid during removal
-
Remove nuts for rear lid hinges.
Installing:
-
Install in reverse order of removal.
Adjusting:
-
Rear lid can be centered and adjusted for height at rear lid hinges.
-
Adjust stop buffers - 2 -.
-
Adjust striker plate - 6 -.
-
Align (center) rear lid to attain specified panel gap dimensions Fig. 1.