A6 Sedan V6-2.8L (AHA) (1998)
/Page-8585001.png)
Subframe: Procedures
Threads In Longmember, Servicing
Threads In Longmember, Servicing
- Servicing the thread in the weld nuts in longmember is possible under certain circumstances.
-
Servicing must only be performed once per thread.
-
If secondary servicing is required, the weld nut must be replaced.
-
WARNING:
-
Wear protective glasses when drilling!
-
Have responsible foreman or next superior check thread repair.
-
Thread insert must have same length as thread in body.
-
Repair possible damage of underbody.
