A6 Sedan V6-2.8L (AHA) (1998)
-
To detach wiring from molded headliner, get out of the vehicle and carefully lower molded headliner onto seats.
-
Detach wiring harness from molded headliner.
-
Remove molded headliner through one of the rear doors.
Installing
-
Carefully insert molded headliner through one of the rear doors.
-
Attach wiring harness to molded headliner
NOTE: Make sure to follow installation sequence, otherwise roof trim cannot be centered.
-
Attach molded headliner at rear.
-
Clip in holders for sun visors.
-
Clip in frame trim - 6 - for sunroof.
-
Carry out remainder of installation in reverse order of removal.
2
-
Sun visor
-
Unclip visor - 2 - from holder - 3 -, unclip cap - 8 - and remove screw - 7 -.
3
-
Sun visor holder
-
Press holder for sun visor firmly to one side and pull out.