A6 Sedan V6-2.8L (AHA) (1998)
/Page-8657003.png)
CAUTION: Always adhere to D-pillar trim installation sequence.
Installing
-
Remove clip - 7 - from D-pillar by pressing together center of clip (always replace clip).
-
Insert clamp - 7 - in D-pillar trim - 1 - and press in retaining clamp - 8 - (check to be sure it is securely installed).
-
Clamp - 7 - must be positioned vertically to supporting surface.
-
Tilt clamp - 7 - to check for secure fit.
