A6 Sedan V6-2.8L (AHA) (1998)
Power Seat Motor: Removal and Replacement
Seat Angle Adjustment Motor (Power Seat With Memory), Removing and Installing
Seat Angle Adjustment Motor (Power Seat With Memory), Removing And Installing
-
Remove seat.
-
Disconnect connector - 2 -.
-
Remove screws - 3 - (3x).
Tightening torque: 4 Nm (35 in.lb)
-
Motor - 1 - does not have a basic setting; the motor and seat can be in any position when removing and installing.
-
A wiring adapter will be required; the type of adapter depends on the installation layout.