A6 Sedan V6-2.8L (AHA) (1998)
Power Seat Motor: Removal and Replacement
Backrest Adjustment Motor (Power Seat With Memory), Removing and Installing
Backrest Adjustment Motor (Power Seat With Memory), Removing And Installing
Removing
-
Removing seat.
-
Remove outer side panel of seat
-
Remove backrest cover panel
NOTE: For greater clarity, the backrest is shown without the seat
-
Remove nut from backrest adjustment motor Fig. 1.
-
Using a screwdriver, pry off spring washer - 5 - on same side as motor (inset - B - in illustration)
-
Using a hammer and punch, knock shaft - 4 - through one side of backrest frame.