A6 Sedan V6-2.8L (AHA) (1998)
Fig. 3 Pulling dust seal on with outer sealing lip on piston
Fig. 4 Inserting inner sealing lip of dust seal using 3409 wedge
Note: Hold piston in front of caliper housing for this procedure.
Fig. 5 Pressing piston into brake caliper housing using piston resetting tool
Notes:
^
Insert piston in hole by hand and insert brake pad -a- in piston before inserting in brake caliper housing.
^
Outer sealing lip of dust seal will then engage in piston groove.